Cam Lock Gate Hinge



Cam Lock Gate Hinge Video
•  EASY TO INSTALL (You only need a shifter and hammer) 
  ADJUSTABLE  
  REUSABLE   
  GATE OPENS AGAINST FENCE
  NO WELDING OR CUTTING 

 

STEEL POST SIZES (Pipe) Model - Hinge
100 mm NB = 114.3 mm O.D. GH 100
80 mm NB = 88.9 mm O.D. GH 80
50 mm NB = 60.3 mm O.D. GH 50
note: O.D.= Outside diameter



INSTALLATION 
1. Bolt on bottom hinge , so gate will swing from SIDE of post.

2. Rotate “keys” with a shifter to clamp post.

3. Position gate on bottom hinge.

4. Chock the other end of gate to correct height.
5. Fit top hinge loosely - so it can swivel.

6. Adjust swing / angle of gate by lifting or lowering the other end of gate so this rotates top hinge.

7. Adjust chock if needed.

8. Clamp top hinge in the final position, by rotating “keys” with shifter

9. Check swing of gate.

10. Hammer all “keys” tight against the post.

 

 

installation-video-button