Stayblock - Steel Stay & Timber Strainer Post

clocksmall


I'm wrapt in them. STAYblock has just revolutionised fencing, I reckon. They are easy to use, specially in unforgiving ground  where it's hard or rocky like we have around here.  You don't have to dig a hole. They take minutes to install and - for me - that is the best part of it. 

Simon Lawler - Omeo



Drill hole 13mm (1/2”) approximately 900mm (3 foot) from ground Insert a STAYpoint
Recommended steel stays
- 2 inch extra light wall x 3m
- 1½ inch medium wall x 3m
(a heavier wall may be used) 
Position STAYpoint in drilled hole.  Use pressure washer (as pictured) at the timber post.
(Or use another method to join strainer and stay)
 
strainass7s
Position stay in centre “U” of STAYBLOCK™.
Loop wire around strainer and STAYBLOCK™ (Allow one turn for every two fence wires – maximum 3 turns)
Locate tension wire (at the base of the neck area)

Tension at centre with wire strainers while checking and adjusting wires.
Tie off as preferred.

 

FEATURES & BENEFITS - STAYblock

stayblock-sketch-orange

• Patented innovative design - compatible with timber or steel stays and strainer posts

• Material - 40 mpa concrete

• Adjustable - suitable for upgrading old fences and gateways

• A flatter stay angle (bottom end of stay is above the ground) reduces jacking.

• Fire Resistant

• Suitable for steep or flat terrain

• Great for rocky locations

• No digging needed

• Weighs 16 kg

• Quick and easy

• Optional single cable system for horses

70% LESS PRESSURE
ON THE GROUND