40 MPa Concrete
Brace-T 12mm Thread - AU$32.00 Price Incl. GST
Brace-T 16mm Thread - AU$35.00 Price Incl. GST
The brace fits and positively locks to your post, with no slipping and no need to drill holes, increasing the strength and longevity of your end assembly.
The toughest of braces for the strongest of fences. Fast and simple to erect, makes bracing a fence easy. The heavy duty version with market leading 16mm thread.
Designed to complement the fenceline stayblock and stay plug. This product fits all products within the Fenceline ecosystem. With the largest surface area block on the market and a stayplug that results in even load distribution, the Fenceline system leads the market.
With no drilling required, secure and high torque adjustment and compatability with the leading end assembly system, the Brace T takes the Fenceline system one more step in front of the competition.
AU$38.50 per unit (pallets of 42 or 63 per order)
Price Incl. GST
*Freight not included. Discounts for bulk orders, please request a quote
Please contact for quote or to find your local stockist.
*This product can be used in conjunction with the 10 year end-assembly guarantee. Please view the specifications drawings here for more information or contact us today.
40 MPa Concrete
Size - n L450mm x B360mm x H90mm
Weight - 15kg
Pallet of 42 weight - 635kg
Pallet of 63 weight - 945kg
Large Concrete footing for maximum surface area. Easy to use, Fire-retardant
Balance load on the Stayblock
Has strength and longevity
UV Stabilized, Glass-filled Nylon
Rotating Knuckles 22 degrees
Fire-retardant self-draining, Knuckles rotates 180 degrees for thread
Brace-t 16mm Thread - $31.90 per unit*
Cable and Thread - $29.35 per unit*
*Freight not included. Discounts for bulk orders, please request a quote
AU$60.00
Price incl. GST
Pieces
Size
Material - 3mm Galvanized Steel Plate
Size - 2” (56mm) for Extra Light Wall Pipe, 1 1/2” (43mm) for Med Wall Pipe, Heavier Wall can be Used
Quantity - 10 / pack
Weight - 130g
Strainer Post Hole - 1/2” or 12mm
Use a 1/2 inch flat gal washer for timbers post only
2" extra pipe or 1 1/2" medium well
1/2" Hole
Drill a 13mm hole in strainer post with a 70˚ angle
Insert Staypoint into 3m steel stay. Use 2” extra light wall or 1.5” medium wall (Heavier grade can be used also)
Position Staypoint in drilled hole
Position stay in bottom of Stayblock “V” Loop wire around strainer and Stayblock
Features | Installation Instructions |
---|---|
Easy to install | Bolt on bottom hinge, so gate will swing from side of post. |
Adjustable | Rotate “keys” with a shifter to clamp post. |
Reusable | Position gate on bottom hinge. |
Gate opens against fence | Chock the other end of gate to correct height. |
No welding or cutting required | Fit top hinge loosely - so it can swivel. |
Adjust swing / angle of gate by lifting or lowering the other end of gate so this rotates top hinge. | |
Adjust chock if needed. | |
Clamp top hinge in the final position, by rotating "keys" with shifter. | |
Check swing of gate. | |
Hammer all “keys” tight against the post. |
AU$50.00
Price incl. GST
Pieces
Size
Post Grips clip onto the bottom of your steel strainer posts prior to driving into the ground.
We recommend using two per post, on opposite sides, this stabilises the post and increases by a factor of 3 the resistance to jacking.
Attach 2 x Post Grips on opposite sides of steel strainer post, the straight side with hook on the inside of the post, leaving the S shaped on the outside of post. Then drive your post into the soil with the Post Grips attached to the pipe, this will stabilise post to resist jacking.
The Retail Price is $50 per box of 10.
AU$60.00 per pack of 100
Price Incl. GST
AU$34.00
Price Incl. GST
3m Stay Pipe Length
850mm -1200mm Stay Height
Form Loop through 1 meter Gal thread M12 Eye Nut
Ferrule measured from tip of wire
Call Us For Your Local Supplier. Phone 03 5755 1334
© Copyright 2024 | All Rights Reserved | Fenceline Solutions | Web Design by ACM Digital